Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 4/SC 4 Rolling bearings – Geometrical product specifications (GPS) 9 4
ISO/TC 4/SC 5 Needle, cylindrical and spherical roller bearings 13 2
ISO/TC 4/SC 6 Insert bearings 2 0
ISO/TC 4/SC 7 Spherical plain bearings 7 1
ISO/TC 4/SC 8 Load ratings and life 16 2
ISO/TC 4/SC 11 Linear motion rolling bearings 7 0
ISO/TC 4/SC 12 Ball bearings 7 0
Filter :
Standard and/or project under the direct responsibility of ISO/TC 4 Secretariat Stage ICS
Withdrawal of ISO/R 15/1-1968
95.99
Withdrawal of ISO/R 15/2-1970
95.99
Rolling bearings — Radial bearings — Boundary dimensions — General plan
95.99
Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm)
95.99
Rolling bearings — Radial bearings — Boundary dimensions, general plan
95.99
Rolling bearings — Radial bearings — Boundary dimensions, general plan
95.99
Rolling bearings — Radial bearings — Boundary dimensions, general plan
90.93
Rolling bearings — Static load ratings
95.99
Rolling bearings — Thrust bearings with flat back faces — Boundary dimensions
95.99
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
95.99
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
95.99
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
90.93
Rolling bearing accessories — Part 1: Tapered sleeves
95.99
Rolling bearing accessories — Part 2: Plummer block housings
95.99
Rolling bearings — Plummer block housings — Boundary dimensions
95.99
Rolling bearings — Plummer block housings — Boundary dimensions
95.99
Rolling bearings — Plummer block housings — Boundary dimensions
90.93
Withdrawal of ISO/R 199-1961
95.99
Withdrawal of ISO/R 199-1968
95.99
Withdrawal of ISO/R 200-1961
95.99
Withdrawal of ISO/R 201-1961
95.99
Cylindrical roller bearings — Separate thrust collars — Boundary dimensions
95.99
Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
95.99
Rolling bearings — Dynamic load ratings and rating life — Part 1: Calculation methods
95.99
Withdrawal of ISO/R 300/I-1963
95.99
Withdrawal of ISO/R 300/II-1965
95.99
Withdrawal of ISO/R 300/III-1968
95.99
Withdrawal of ISO/R 355/1-1963
95.99
Withdrawal of ISO/R 355/2-1965
95.99
Withdrawal of ISO/R 355/3-1967
95.99
Withdrawal of ISO/R 355/4-1968
95.99
Withdrawal of ISO/R 355/5-1969
95.99
Withdrawal of ISO/R 355/6-1970
95.99
Withdrawal of ISO/R 355/7-1970
95.99
Withdrawal of ISO/R 355/8-1973
95.99
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations
95.99
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 1
95.99
Rolling bearings — Metric tapered roller bearings — Boundary dimensions and series designations — Addendum 2
95.99
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
95.99
Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations — Amendment 1
95.99
Rolling bearings with locating snap ring — Dimensions
95.99
Withdrawal of ISO/R 465-1965
95.99
Radial bearings — Tolerances
95.99
Withdrawal of ISO/R 533-1966
95.99
Withdrawal of ISO/R 577/1-1967
95.99
Withdrawal of ISO/R 477/2-1968
95.99
Withdrawal of ISO 477/3-1973
95.99
Rolling bearings — Tapered roller bearings — Inch series — Tolerance classes 4 (normal tolerances), 3, 0 and 00
95.99
Tapered roller bearings — Inch series — Tolerances
95.99
Rolling bearings — Metric series — Chamfer dimension limits
95.99
Withdrawal of ISO/R 1038-1969
95.99
Tapered roller bearings — Inch series — Chamfer dimension limits
95.99
Rolling bearings — Tolerances — Definitions
95.99
Rolling bearings for railway axle-boxes — Acceptance inspection
95.99
Needle roller bearings — Light and medium series — Dimensions and tolerances
95.99
Rolling bearings — Instrument precision bearings
95.99
Rolling bearings — Instrument precision bearings
95.99
Withdrawal of ISO/R 1646-1970
95.99
Withdrawal of ISO/R 1648-1971
95.99
Rolling bearings — Bearings with spherical outside surface and extended inner ring width
95.99
Withdrawal of ISO 2265-1972
95.99
Withdrawal of ISO 2316-1973
95.99
Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class)
95.99
Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions
95.99
Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
90.93
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
95.99
Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions
95.99
Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices
90.93
Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab
95.99
Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab
95.99
Withdrawal of ISO 3097-1974
95.99
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars
95.99
Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings
95.99
Rolling bearings — Bearing parts — Balls for rolling bearings
95.99
Rolling bearings — Balls — Dimensions and tolerances
95.99
Rolling bearings — Balls — Dimensions and tolerances
95.99
Rolling bearings — Ceramic rolling elements — Common vocabulary and characteristics of surface imperfections
20.00
Rolling bearings — Vocabulary
95.99
Rolling bearings — Vocabulary
95.99
Rolling bearings — Vocabulary — Amendment 1
95.99
Rolling bearings — Vocabulary
90.92
Rolling bearings — Vocabulary
50.20
Rolling bearings — Radial internal clearance
95.99
Spherical plain radial bearings, joint type — Boundary dimensions — Part 1: Dimension series E and G
95.99
Withdrawal of ISO 6124-1979
95.99
Rolling bearings — Needle rollers — Tolerances
95.99
Rolling bearings — Test and assessment methods for cleanliness
20.60
Radial ball bearings with flanged outer ring — Flange dimensions
95.99
Radial ball bearings with flanged outer ring — Flange dimensions — Technical Corrigendum 1
95.99
Rolling bearings — Radial ball bearings with flanged outer ring — Flange dimensions
95.99
Rolling bearings — Metric tapered roller bearings — Designation system
95.99
Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides
95.99
Rolling bearings — Symbols for quantities
95.99
Rolling bearings — Symbols for physical quantities
90.93
Rolling bearings — Symbols for physical quantities — Amendment 1
60.60
Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals
90.93
Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface
90.93
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
95.99
Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
90.93
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
95.99
Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
90.93
Rolling bearings — Damage and failures — Terms, characteristics and causes
95.99
Rolling bearings — Damage and failures — Terms, characteristics and causes
90.60
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by attribute vocabulary
95.99
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary
90.93
Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
60.60
Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+
60.60
Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ
60.60
Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
60.60
Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings
95.99
Rolling bearings — Parts library — Reference dictionary for rolling bearings
60.60

No matching records found. Please try changing the filter settings.