Фильтр :
| Стандарт и/или проект находящийся в компетенции ISO/TC 39/SC 8 Секретариата | Этап | ICS |
|---|---|---|
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection |
95.99 | |
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection |
90.93 | |
|
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type |
95.99 | |
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type |
90.93 | |
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type — Technical Corrigendum 1 |
60.60 | |
|
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type |
95.99 | |
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type |
90.93 | |
|
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connection |
90.93 | |
|
Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests) |
95.99 | |
|
Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests) |
95.99 | |
|
Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws |
90.93 | |
|
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws |
90.20 | |
|
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jaws |
90.93 | |
|
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws |
90.93 | |
|
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications |
95.99 | |
|
Machine tools — Jaw mountings on power chucks |
95.99 | |
|
Code of practice for the safe operation of work-holding chucks used on lathes |
95.99 | |
|
Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
90.93 | |
|
Machine tools — Work holding chucks — Vocabulary |
90.93 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.