Фильтр :
Стандарт и/или проект Этап ТК
Withdrawal of ISO 235/1-1975
95.99 ISO/TC 29
Withdrawal of ISO 235/2-1972
95.99 ISO/TC 29
Parallel shank jobber and stub series drills and Morse taper shank drills
95.99 ISO/TC 29/SC 9
Parallel shank jobber and stub series drills and Morse taper shank drills — Technical Corrigendum 1
95.99 ISO/TC 29/SC 9
Parallel shank jobber and stub series drills and Morse taper shank drills
90.93 ISO/TC 29/SC 9
Hand reamers
90.20 ISO/TC 29/SC 9
Long fluted machine reamers, Morse taper shanks
95.99 ISO/TC 29
Reamers — Part 2: Long fluted machine reamers with Morse taper shanks
90.93 ISO/TC 29/SC 9
Drill chuck tapers
95.99 ISO/TC 29
Drill chuck tapers
90.93 ISO/TC 29/SC 9
Parallel shank twist drills — Long series
95.99 ISO/TC 29/SC 9
Cylindrical shank twist drills — Long series
95.99 ISO/TC 29/SC 9
Cylindrical shank twist drills — Long series
90.93 ISO/TC 29/SC 9
Machine chucking reamers with parallel shanks or Morse taper shanks
95.99 ISO/TC 29/SC 9
Machine chucking reamers with cylindrical shanks and Morse taper shanks
90.93 ISO/TC 29/SC 9
Special tolerances for reamers
90.93 ISO/TC 29/SC 9
Centre drills for centre holes without protecting chamfers — Type A
95.99 ISO/TC 29/SC 9
Centre drills for centre holes without protecting chamfers — Type A
90.60 ISO/TC 29/SC 9
Machine bridge reamers
95.99 ISO/TC 29/SC 9
Machine bridge reamers
95.99 ISO/TC 29/SC 9
Machine bridge reamers
60.60 ISO/TC 29/SC 9
Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks
95.99 ISO/TC 29/SC 9
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
95.99 ISO/TC 29/SC 9
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
90.60 ISO/TC 29/SC 9
Drills for use prior to tapping screw threads
90.93 ISO/TC 29/SC 9
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
90.93 ISO/TC 29/SC 9
Centre drills for centre holes with protecting chamfer — Type B
95.99 ISO/TC 29/SC 9
Centre drills for centre holes with protecting chamfer — Type B
90.60 ISO/TC 29/SC 9
Centre drills for centre holes with radius form — Type R
95.99 ISO/TC 29/SC 9
Centre drills for centre holes with radius form — Type R
90.60 ISO/TC 29/SC 9
Extra long Morse taper shank twist drills
95.99 ISO/TC 29
Extra-long Morse taper shank twist drills
95.99 ISO/TC 29/SC 9
Extra-long Morse taper shank twist drills
90.93 ISO/TC 29/SC 9
Extra long parallel shank twist drills
95.99 ISO/TC 29
Extra-long parallel shank twist drills
95.99 ISO/TC 29/SC 9
Extra-long parallel shank twist drills
90.93 ISO/TC 29/SC 9
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
95.99 ISO/TC 29/SC 9
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
90.60 ISO/TC 29/SC 9
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
95.99 ISO/TC 29/SC 9
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
90.60 ISO/TC 29/SC 9
Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
90.60 ISO/TC 29/SC 9
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
95.99 ISO/TC 29
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
95.99 ISO/TC 29/SC 9
Subland twist drills for holes prior to tapping screw threads
90.93 ISO/TC 29/SC 9
Subland twist drills with parallel shanks for holes prior to tapping screw threads
95.99 ISO/TC 29
Subland twist drills with cylindrical shanks for holes prior to tapping screw threads
95.99 ISO/TC 29/SC 9
Hand taper pin reamers
90.93 ISO/TC 29/SC 9
Machine taper pin reamers with parallel shanks
95.99 ISO/TC 29/SC 9
Machine taper pin reamers with parallel shanks
90.93 ISO/TC 29/SC 9
Machine taper pin reamers with Morse taper shanks
95.99 ISO/TC 29/SC 9
Machine taper pin reamers with Morse taper shanks
90.93 ISO/TC 29/SC 9
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
95.99 ISO/TC 29/SC 9
Countersinks, 90°, with Morse taper shanks and detachable pilots
90.93 ISO/TC 29/SC 9
Countersinks, 90 degrees, with parallel shanks and solid pilot
95.99 ISO/TC 29
Countersinks, 90 degrees, with parallel shanks and solid pilots
95.99 ISO/TC 29/SC 9
Countersinks, 90°, with parallel shanks and solid pilots
90.93 ISO/TC 29/SC 9
Counterbores with parallel shanks and solid pilots
95.99 ISO/TC 29
Counterbores with parallel shanks and solid pilots
95.99 ISO/TC 29/SC 9
Counterbores with parallel shanks and solid pilots
90.93 ISO/TC 29/SC 9
Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions
95.99 ISO/TC 29/SC 9
Twist drills — Terms, definitions and types
90.93 ISO/TC 29/SC 9
Twist drills — Terms, definitions and types — Technical Corrigendum 1
60.60 ISO/TC 29/SC 9
Reamers — Terms, definitions and types
90.93 ISO/TC 29/SC 9
Rotary percussive masonry drills with hardmetal tips — Dimensions
95.99 ISO/TC 29
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
95.99 ISO/TC 29
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
95.99 ISO/TC 29/SC 9
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
90.93 ISO/TC 29/SC 9
Core drills with parallel shanks and with Morse taper shanks
95.99 ISO/TC 29/SC 9
Core drills with parallel shanks and with Morse taper shanks
90.93 ISO/TC 29/SC 9
Drills with indexable inserts — Cylindrical shanks with a parallel flat
95.99 ISO/TC 29/SC 9
Drills with indexable inserts — Cylindrical shanks with a parallel flat
90.60 ISO/TC 29/SC 9
Key type three-jaw drill chucks — Specification
90.93 ISO/TC 29/SC 9
Keyless type three-jaw drill chucks — Specification
90.93 ISO/TC 29/SC 9
Spot drills
95.99 ISO/TC 29/SC 9
Spot drills
90.60 ISO/TC 29/SC 9
High-speed steel two-flute twist drills — Technical specifications
90.93 ISO/TC 29/SC 9

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.