Paints and varnishes — Sampling

Paints and varnishes — Sampling of products in liquid or paste form

Paints and varnishes — Examination and preparation of samples for testing

Paints and varnishes — Examination and preparation of samples for testing

Paints and varnishes — Examination and preparation of samples for testing — Technical Corrigendum 1

Paints and varnishes — Examination and preparation of test samples

Paints and varnishes — Standard panels for testing

Paints and varnishes — Standard panels for testing

Paints and varnishes — Standard panels for testing

Paints and varnishes — Standard panels for testing

Paints and varnishes — Standard panels for testing

Paints and varnishes — Determination of volatile and non-volatile matter

Paints and varnishes — Surface-drying test — Ballotini method

Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method

Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method

Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method

Paints and varnishes — Scratch test

Paints and varnishes — Scratch test

Paints and varnishes — Bend test (cylindrical mandrel)

Paints and varnishes — Bend test (cylindrical mandrel)

Paints and varnishes — Bend test (cylindrical mandrel)

Paints and varnishes — Cupping test

Paints and varnishes — Cupping test

Paints and varnishes — Cupping test

Paints and varnishes — Determination of resistance to water — Water immersion method

Paints and varnishes — Pendulum damping test

Paints and varnishes — Pendulum damping test

Paints and varnishes — Pendulum damping test — Technical Corrigendum 1

Paints and varnishes — Pendulum damping test

Paints and varnishes — Pendulum damping test

Paints and varnishes — Determination of fineness of grind

Paints, varnishes and printing inks — Determination of fineness of grind

Paints, varnishes and printing inks — Determination of fineness of grind

Paints, varnishes and printing inks — Determination of fineness of grind

Paints and varnishes — Cross-cut test

Paints and varnishes — Cross-cut test

Paints and varnishes — Cross-cut test

Paints and varnishes — Cross-cut test

Paints and varnishes — Cross-cut test

Paints and varnishes — Determination of flow time by use of flow cups

Paints and varnishes — Determination of flow time by use of flow cups

Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 1

Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 2

Paints and varnishes — Determination of flow time by use of flow cups

Paints and varnishes — Determination of flow time by use of flow cups

Paints and varnishes — Determination of film thickness

Paints and varnishes — Determination of film thickness

Paints and varnishes — Determination of film thickness

Paints and varnishes — Determination of film thickness

Paints and varnishes — Determination of film thickness

Paints and varnishes — Determination of light fastness of paints for interior use

Paints and varnishes — Notes for guidance on the conduct of natural weathering tests

Paints and varnishes — Natural weathering of coatings — Exposure and assessment

Paints and varnishes — Natural weathering of coatings — Exposure and assessment

Paints and varnishes — Determination of density — Part 1: Pyknometer method

Paints and varnishes — Determination of density — Part 1: Pyknometer method

Paints and varnishes — Determination of density — Part 1: Pycnometer method

Paints and varnishes — Determination of density — Part 1: Pycnometer method

Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method

Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method

Paints and varnishes — Determination of density — Part 3: Oscillation method

Paints and varnishes — Determination of density — Part 3: Oscillation method

Paints and varnishes — Determination of density — Part 3: Oscillation method

Paints and varnishes — Determination of density — Part 4: Pressure cup method

Paints and varnishes — Determination of density — Part 4: Pressure cup method

Paints and varnishes — Determination of density

Paints and varnishes — Determination of resistance to liquids — Part 1: General methods

Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water

Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water

Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method

Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium

Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium

Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium

Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods

Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods

Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method

Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method

Paints and varnishes — Determination of resistance to liquids

Paints and varnishes — Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees

Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees

Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees — Technical Corrigendum 1

Paints and varnishes — Determination of gloss value at 20°, 60° and 85°

Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour

Paints and varnishes — Buchholz indentation test

Paints and varnishes — Buchholz indentation test

Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear

Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear

Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed

Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed

Paints and varnishes — Determination of viscosity at a high rate of shear

Paints and varnishes — Large scale brushing test

Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry

Rheology — Part 2: General principles of rotational and oscillatory rheometry

Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate

Paints and varnishes — Determination of resistance to humid atmospheres containing sulphur dioxide

Paints and varnishes — Determination of quantity of material in a container

Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle

Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle

Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle

Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material

Paints and varnishes — Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating

Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating

Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating — Technical Corrigendum 1

Paints and varnishes — Determination of the effect of heat

Paints and varnishes — Determination of the effect of heat

Paints and varnishes — Determination of the effect of heat

Paints, varnishes and plastics — Determination of non-volatile-matter content

Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing

Paints and varnishes — Visual comparison of the colour of paints

Paints and varnishes — Visual comparison of the colour of paints

Paints and varnishes — Visual comparison of colour of paints

Paints and varnishes — Print-free test

Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)

Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) — Amendment 1

Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film)

Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) — Amendment 1

Paints and varnishes — Pressure test for stackability

Paints and varnishes — Pressure test for stackability

Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates

Paints and varnishes — Determination of resistance to filiform corrosion — Part 1: Steel substrates

Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates

Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates — Technical Corrigendum 1

Paints and varnishes — Determination of resistance to filiform corrosion — Part 2: Aluminium substrates

Paints and varnishes — Filiform corrosion test on steel

Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Evaluation of the compatibility of a product with a surface to be painted — Methods of test

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of quantity and size of common types of defect — Part 1: General principles and pictorial scales for blistering and rusting

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 1: General principles and rating schemes

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 2: Designation of degree of blistering

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 3: Designation of degree of rusting

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 4: Designation of degree of cracking

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 5: Designation of degree of flaking

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking

Paints and varnishes — Evaluation of degradation of paint coatings — Designation of intensity, quantity and size of common types of defect — Part 6: Rating of degree of chalking by tape method

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 7: Assessment of degree of chalking by velvet method

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials

Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation

Paints and varnishes — Determination of resistance to humidity — Part 1: Condensation (single-sided exposure)

Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres

Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir)

Paints and varnishes — Determination of resistance to humidity — Part 3: Condensation (in-cabinet exposure with heated, bubbling water reservoir)

Paints and varnishes — Determination of resistance to humidity (continuous condensation)

Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter

Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter

Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter

Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter

Paints and varnishes — Falling-weight test

Paints and varnishes — Falling weight test

Paints and varnishes — Determination of micro-indentation hardness — Part 1: Knoop hardness by measurement of indentation length

Paints and varnishes — Determination of micro-indentation hardness — Part 2: Knoop hardness by measurement of indentation depth under load

Paints and varnishes — Indentation test (spherical or pyramidal)

Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints

Paints and varnishes — Determination of hiding power — Part 1: Kubelka-Munk method for white and light-coloured paints

Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate

Paints and varnishes — Determination of hiding power — Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

Paints and varnishes — Determination of hiding power — Part 3: Determination of hiding power of paints for masonry, concrete and interior use

Paints and varnishes — Preparation of acid extracts from dried paint films

Paints and varnishes — Bend test (conical mandrel)

Paints and varnishes — Bend test (conical mandrel)

Paints and varnishes — Determination of resistance to neutral salt spray

Paints and varnishes — Determination of resistance to neutral salt spray (fog)

Paints and varnishes — Assessment of natural spreading rate — Brush application

Paints and varnishes — Colorimetry — Part 1: Principles

Paints and varnishes — Colorimetry — Part 2: Colour measurement

Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences

Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films

Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1

Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour transmission rate (permeability)

Paints and varnishes — Determination of water-vapour transmission properties — Cup method

Paints and varnishes — Determination of water-vapour transmission properties — Cup method

Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method

Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen

Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen

Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method

Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen

Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method

Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen

Paints and varnishes — Coating of test panels at a specified spreading rate — Brush application

Coating powders — Part 1: Determination of particle size distribution by sieving

Coating powders — Part 1: Determination of particle size distribution by sieving

Coating powders — Part 2: Determination of density by gas comparison pyknometer (referee method)

Coating powders — Part 2: Determination of density by gas comparison pycnometer (referee method)

Coating powders — Part 3: Determination of density by liquid displacement pyknometer

Coating powders — Part 3: Determination of density by liquid displacement pycnometer

Coating powders — Part 4: Calculation of lower explosion limit

Coating powders — Part 4: Calculation of lower explosion limit — Technical Corrigendum 1

Coating powders — Part 4: Calculation of lower explosion limit

Coating powders — Part 5: Determination of flow properties of a powder/air mixture

Coating powders — Part 5: Determination of flow properties of a powder/air mixture

Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature

Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature — Amendment 1

Coating powders — Part 6: Determination of gel time of thermosetting coating powders at a given temperature

Coating powders — Part 7: Determination of loss of mass on stoving

Coating powders — Part 7: Determination of loss of mass on stoving

Coating powders — Part 8: Assessment of the storage stability of thermosetting powders

Coating powders — Part 8: Assessment of the storage stability of thermosetting powders

Coating powders — Part 9: Sampling

Coating powders — Part 10: Determination of deposition efficiency

Coating powders — Part 10: Determination of deposition efficiency

Coating powders — Part 11: Inclined-plane flow test

Coating powders — Part 11: Inclined-plane flow test

Coating powders — Part 12: Determination of compatibility

Coating powders — Part 12: Determination of compatibility

Coating powders — Part 13: Particle size analysis by laser diffraction

Coating powders — Part 13: Particle size analysis by laser diffraction

Coating powders — Part 14: Terminology

Coating powders — Part 14: Vocabulary

Coating powders — Part 15: Rheology

Coating powders — Part 16: Determination of density by liquid displacement in a measuring cylinder

Test for sustained combustibility of liquids

Paints and varnishes — Determination of the ability of liquid paints to sustain combustion

Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time

Paints and varnishes — Drying tests — Part 2: Pressure test for stackability

Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini

Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder

Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test

Paints and varnishes — Drying tests — Part 6: Print-free test

Paints and varnishes — Determination of through-dry state and through-dry time — Method of test

Paints and varnishes — Thermal performance of paint films — Determination of solar irradiation penetration ratio with heat flow meter

Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing

Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing

Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing

Paints and varnishes — Modelling of biocide release rate from antifouling paints by mass-balance calculation

Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation

Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered xenon-arc radiation

Paints and varnishes — Determination of resistance to humidity (intermittent condensation)

Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV and water

Paints and varnishes — Exposure of coatings to artificial weathering — Exposure to fluorescent UV lamps and water

Best practices for the creation/evaluation of fingerprint analysis in accordance with the ISO 28199 series

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity — Technical Corrigendum 1

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light

Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction

Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings

Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 1: Start temperature of the curing reaction

Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature

Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus

Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus — Technical Corrigendum 1

Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus

Paints and varnishes — Determination of mar resistance

Paints and varnishes — Lighting and procedure for visual assessments of coatings

Paints and varnishes — Lighting and procedure for visual assessments of coatings

Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements

Paints and varnishes — Determination of reflection haze on paint films at 20 degrees

Paints and varnishes — Determination of haze on paint films at 20°

Paints and varnishes — Determination of pigment content — Part 1: Centrifuge method

Paints and varnishes — Determination of pigment content — Part 2: Ashing method

Paints and varnishes — Determination of pigment content — Part 3: Filtration method

Paints and varnishes — Determination of electrical conductivity and resistance

Paints and varnishes — Determination of electrical conductivity and resistance

Paints and varnishes — Artificial weathering including acidic deposition

Paints and varnishes — Artificial weathering including acidic deposition

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract

Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract

Paints and varnishes — Determination of film hardness by pencil test

Paints and varnishes — Determination of film hardness by pencil test

Paints and varnishes — Determination of film hardness by pencil test

Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the steady-state concentration of formaldehyde in a small test chamber

Paints, varnishes and raw materials for paints and varnishes — Sampling

Paints, varnishes and raw materials for paints and varnishes — Sampling

Paints, varnishes and raw materials for paints and varnishes — Sampling

Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water

Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance

Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters

Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps

Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 1: Terms and definitions

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 1: Terms and definitions

Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 2: Collection of data

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data

Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dummy cells

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 3: Processing and analysis of data from dummy cells

Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated specimens

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens

Paints and varnishes — Evaluation of sag resistance

Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting

Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting

Paints and varnishes — Determination of the overcoatability and recoatability of a coating

Paints and varnishes — T-bend test

Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique

Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique

Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 5: Measurement of transmittance properties of UV protective coatings

Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge

Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane

Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology

Determination of the film thickness of coatings using an ultrasonic gage

Paints and varnishes — Wedge-cut method for determination of film thickness (scribe and drill method)

Paints and varnishes — Adhesion of coatings

Paints and varnishes — Wettability — Part 1: Terminology and general principles

Paints and varnishes — Wettability — Part 1: Vocabulary and general principles

Paints and varnishes — Wettability — Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle

Paints and varnishes — Wettability — Part 3: Determination of the surface tension of liquids using the pendant drop method

Paints and varnishes — Wettability — Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension

Paints and varnishes — Wettability — Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy

Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle

Paints and varnishes — Wettability — Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)

Paints and varnishes — Determination of image clarity (degree of sharpness of reflected or transmitted image)

Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory car-wash

Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body

Paints and varnishes — Determination of stone-chip resistance of coatings — Part 4: Mobile multi-impact testing on a small testing area

Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point

Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 1: General guidance

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 2: Evaluation procedure for multi-impact stone-chipping test

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 3: Evaluation of delamination and corrosion around a scribe

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion

Paints and varnishes — Evaluation of defects on coated surfaces using optical imaging — Part 4: Evaluation of filiform corrosion

Paints and varnishes — Determination of settling

Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)

Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings

Paints and varnishes — Practical determination of non-volatile and volatile matter content during application

Paints and varnishes — Electro-deposition coatings — Part 1: Vocabulary

Paints and varnishes — Electro-deposition coatings — Part 2: Throwing power

Paints and varnishes — Electro-deposition coatings — Part 3: Compatibility of electro-deposition coating materials with a reference oil

Paints and varnishes — Electro-deposition coatings — Part 4: Compatibility of electro-deposition coating materials with liquid, paste-like and solid foreign materials

Paints and varnishes — Electro-deposition coatings — Part 5: Determination of sieve residue

Paints and varnishes — Electro-deposition coatings — Part 6: Entry marks

Paints and varnishes — Electro-deposition coatings — Part 7: Electrical wet-film resistance

Paints and varnishes — Electro-deposition coatings — Part 8: Electric charge density

Paints and varnishes — Electro-deposition coatings — Part 9: Stoving loss

Paints and varnishes — Electro-deposition coatings — Part 10: Edge protection

Paints and varnishes — Electro-deposition coatings — Part 11: Bath stability

Paints and varnishes — Electro-deposition coatings — Part 12: Sedimentation on horizontal areas

Paints and varnishes — Electro-deposition coatings — Part 13: Determination of re-solving behaviour

Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour

Paints and varnishes — Electro-deposition coatings — Part 15: Permeate residues

Paints and varnishes — Electro-deposition coatings — Part 16: Pigment-binder ratio

Paints and varnishes — Scratch test using a spring-loaded pen

Paints and varnishes — Determination of solar reflectance

Paints and varnishes — Test method for evaluation of adhesion of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage

Paints and varnishes — On-site test methods on quality assessment for interior wall coatings

Solvents for paints and varnishes — Demineralized water for industrial applications — Specification and test methods

Determination of pH value — Reference buffer solutions for the calibration of pH measuring equipment

Determination of pH value — Technical buffer solutions for the calibration of technical measuring installations

Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate

Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels

Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of test panels — Technical Corrigendum 1

Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 1: Vocabulary and preparation of test panels

Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling

Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling

Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power

Paints and varnishes — Evaluation of properties of coating systems related to the spray application process — Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power